Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.
According to the Bureau of Labor Statistics, 45 percent of all painters are self-employed, though that number may be slightly higher if companies hire freelancers or self-employed painters as part of their team. The price that painters charge for their services is largely dependent on their association and whether the job is completed in the warmer or colder months (painters often charge more in the summer and less in the winter, given demand and other factors). More information regarding painter rates and associated factors is included below.
To solidify this response, we have been in business for over 30 years as a painting contractor. We didn't just paint a couple of houses 25 or 30 years ago, we paint approximately 900-1000 painting jobs per year and operate with 40 professional painters doing commercial, residential and industrial painting. This article on behalf of Angie's List is totally asinine! I was under the impression Angie's List was only carrying "legitimate" contractors with established reputations. This article written is primarily referring to bottom feeding, one man band operations, trying to hustle for a paycheck.

Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.

Home Painters

×