When you refinish your existing cabinet doors, you get a whole new look without the astronomical costs normally associated with a kitchen remodel. It’s a much smarter way to update your space, especially if your cabinets are still in good condition. It doesn’t make sense to throw out perfectly good materials, just because you’re tired of the color.
Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.

Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.
Once work begins, hold brief daily meetings to discuss the job and schedule and quash any misunderstandings. If there are surprises, seek middle ground. No contract can anticipate every possibility. Materials may be unavailable. Large chunks of rotten siding may crumble along with the old paint. Exterior jobs may be stopped cold by a week of steady rain. But know that you'll pay extra if you change your mind about a color after the trim is already painted or otherwise add tasks to the project.
I agree with JHs. If there is no new color on it at all, just talk to the painter about it, if it was an honest mistake (which can happen very easily while painting) your painter should have no problem fixing it. However, in my years of experience, it is not unusual for 2 coats of door paint (good quality) not to cover very well at all. I once painted a red door 7 times, plus a tinted prime coat before I found the door to be a solid color.
A fresh coat of paint makes everything it touches seem brand new. But such new beginnings cost real money. Professional painters charge around $4,000 for labor and materials to paint the exterior of a 2,500-square-foot, two-story home and roughly $5,500 for the interior. Painters’ rates may range from $20 to $60 an hour, but around $40 is typical in urban areas. 

Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts.
I'm hiring an interior painter and that is why I was reading this comment list. I'm concerned about your comment about Angie's List. Some of us don't have personal recommendations for tradespersons, and rely on sites like this. Are you saying that Angie's List's reviews are not complete or that they do not print some of the negative reviews? It's hard to know what to do - I have not been able to find a person who just had their paint done so I can ask him/her about the quality of the painter.

In England, little is known of the trade and its structures before the late 13th century, at which paint guilds began to form, amongst them the Painters Company and the Stainers Company. These two guilds eventually merged with the consent of the Lord Mayor of the City of London in 1502, forming the Worshipful Company of Painter-Stainers. The guild standardised the craft and acted as a protector of the trade secrets. In 1599, the guild asked Parliament for protection, which was eventually granted in a bill of 1606, which granted the trade protection from outside competition such as plasterers.[2]


7/16/2017 Florida home painters is a professional painting company with over 20 years experience in the… Florida home painters is a professional painting company with over 20 years experience in the painting business. Unfortunately we run across a few clients each year like this.  Florida home painters would in most cases reply to a report but will leave it at the racial slur. In the last four years we've performed over 500 jobs for our clients. We have now compiled in a 13 year period over 450 clients in Lighthouse Point alone. Read more

As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
You’ll easily find the best interior paint colors for your home, from the top brands, here online and at your local Home Depot. Our knowledgeable store associates can help you color-match paint from almost any brand to get the shade of your desire. We’ve also got you covered on all the essential painting supplies, including paint brushes, tarps, drop cloths, plastic sheeting and more.
If you don’t have any lead in your paint, then it’s time to start scraping. Begin with a hand scraper to remove all of the loose paint and tight spots. For larger easy to reach areas, a rotary sander is the tool for the job. You’ll need eye protection and a respirator. The sander is powerful, so you have to be careful not to damage the wood while removing paint. Any paint that is cracked, blistered, or peeling needs to go. Next, smooth the transitions from the bare wood you’ve revealed to the existing paint.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
If you paint over dirty, oily surfaces, the paint will easily chip or peel off. So before painting, clean grimy areas with a deglosser or heavy-duty cleaner intended for prepaint cleaning. They work well to clean painted, varnished or enameled surfaces to improve the adhesion of the new paint. They’re ideal for cleaning greasy or oily areas like kitchen and bathroom walls and removing hand marks around light switches and doorknobs.
When you’re ready to tackle your next paint project, we offer an amazing choice of colors from top paint brands, at the best price, and expert know-how to help you do the job right. Start outside by taking an inventory of your siding and trim. If your paint is fading or peeling off your siding, start the prep work by repairing the siding and trim with some waterproof patching compound. Once dry, sand and apply primer. Then, repaint those areas until your exterior looks fresh and clean.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
When you’re ready to tackle your next paint project, we offer an amazing choice of colors from top paint brands, at the best price, and expert know-how to help you do the job right. Start outside by taking an inventory of your siding and trim. If your paint is fading or peeling off your siding, start the prep work by repairing the siding and trim with some waterproof patching compound. Once dry, sand and apply primer. Then, repaint those areas until your exterior looks fresh and clean.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements. 
×