I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
Also prime the ends of adjoining boards. This step pays off by slowing the moisture penetration that can lead to peeling at the joints. If the new siding is redwood or cedar, buy a special “stainblocking” primer. Both of these woods contain natural chemicals (tannins) that can bleed through paint, causing brownish stains. A stain-blocking primer will seal in the tannins.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
Disclaimer: NerdWallet strives to keep its information accurate and up to date. This information may be different than what you see when you visit a financial institution, service provider or specific product’s site. All financial products, shopping products and services are presented without warranty. When evaluating offers, please review the financial institution’s Terms and Conditions. Pre-qualified offers are not binding. If you find discrepancies with your credit score or information from your credit report, please contact TransUnion® directly.
Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.
We have been beautifying homes like yours for over 30 years. Let our team come to your home and vitalize your homes exterior and interior. We are offering the newest product called "Liquid Stucco Fogging" with prices starting at $799 for single family homes. We also do paint, natural stone, rock, cement driveways, drywall, stucco matching and patching and much more - put our 30 years experience to the test. We do the job right the First time out! No money down just good work at a fair price.Call today to schedule your appointment.

You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.
This guy Joe told me he was an expert at refinishing wood doors so I hired him but he wanted to paint the whole house to make it worth it. He then sent two Hispanics. Only one of whom spoke English . They painted the house left a huge mess then painted my mahogany doors with primer. The next day they painted them brown thus ruining about 5000 dollars in doors .I was at work in the four hours it took them to ruin my doors. Never leave anyone alone without watching. That was my mistake. The owner Joe refused to fix them and was such a crazed person shaking and starting to cry so I paid him 4000 dollars to go away. A week later that ugly brown paint bubbled up. Again I texted him the pictures and asked him to fix them. He refused . I plan on taking them to small claims court. He is not what he says he is. He actually didn't touch my house he has no idea how to refinish wood doors. Please come by and see my awful paint job at 615 SE 26th Ave. Ft. Lauderdale ,Fl 33301 Observe closely the brown paint over white primer showing through. So embarrassing.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
Over time, even the best paint job needs a new coat. Old paint peels and fades and those colors that were all the rage ten years ago can start to look a bit dated. With your busy schedule, you've got no time to pick up a paintbrush, and you've just remembered that your in-laws are in town for dinner next week! We hear stories like this all the time, and our reply is always the same: don't panic! Book a painting professional through the Handy platform. Wall painting shouldn’t be stressful and when you use the Handy platform, it won’t be.
I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
Interior Painting and Restoration: Interior painting for antique buildings often means painting or papering over plaster, which cracks as the building settles and results in moisture stains. Arch Painting remedies these problems by filling and sanding cracks and applying bacteria-resistant primer over discolored areas. Need light carpentry renovations to provide a flawless foundation for your paint? We’re happy to accommodate.

Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.
To deliver picture-perfect results, our house painters offer Memphis homeowners our 20-Step Process for house painting. This process includes a color, paint, and finish consultation to help you choose the perfect tone (or tones) for your project. This is followed by a skilled and systematic approach to house painting that delivers smooth surfaces, crisp lines, and a flawless finish.
Also prime the ends of adjoining boards. This step pays off by slowing the moisture penetration that can lead to peeling at the joints. If the new siding is redwood or cedar, buy a special “stainblocking” primer. Both of these woods contain natural chemicals (tannins) that can bleed through paint, causing brownish stains. A stain-blocking primer will seal in the tannins.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
×