Al was quick to respond to our inquiries, he was really accommodating to our needs and did a great job. We needed a part of our wall patched up after some water damage. Al gave us a good quote and was willing to work around our schedule and get the job done quickly. He was really professional and courteous. Would recommend him for any job you need!
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Modern Masters 1 gal. Brass Metallic Interior Paint Modern Masters 1 gal. Brass Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
© 2018 Condé Nast. All rights reserved. Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18). Your California Privacy Rights. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Condé Nast. Ad Choices. CN Entertainment.
Modern Masters 1 gal. Champagne Metallic Interior Paint Modern Masters 1 gal. Champagne Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
If you're going to do any part of the painting or prep work on your own, you must know that the first step in preparing a surface is washing it. Since dirt can affect the smoothness of a surface area -- and therefore paint's adhesion to it -- use soap to remove any dirt or stains. Make sure there's no soap left on the walls when you're finished; also make sure to remove any gloss with sandpaper and vacuum up the leftover dust.
As you scrape, you may find that the wood has turned gray or black in some areas. Check for rot by probing these areas with a nail. Spots that are discolored but firm are simply weathered. Weathered wood doesn’t hold paint very well, so sand away the gray surface. If you find soft areas, you’ve got rot. Small, shallow soft spots can be dug out and repaired with a two-part filler such as Minwax High Performance Wood Filler. But when rot is deep and widespread, it’s best to replace the entire piece of wood.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
For interior paint I prefer the semi-gloss, provides a very subtle sheen and is super easy to clean -no flaking, chipping, etc. I've painted a lot, and found that Sherwin Williams Ovation paint has been the easiest to use, and provides the best coverage. I even painted my ceilings with it and WOW! I was done it no time at all, with perfect coverage.

O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
In the conventional household painting methods, the customers have always found it a very difficult and cumbersome activity when it comes to getting their homes repainted. The R&D team of MIPPL worked extensively on these products and processes which could enable any house being painted in just a day. This is done at a fixed yet competitive cost that gives our customers a Great Value for their Money. Development of Faster Drying products and sprayable application processes have been the unique introductions of MIPPL that have made such a massive task possible to be completed in such a short span of time.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
We paint all types of projects — interior and exterior residential, commercial, public, and industrial buildings. Our expert painters are dedicated to providing our clients with prompt, professional, quality work. For over 30 years, we have provided friendly service at affordable rates. Our goal at House Painting Inc. is to instill confidence in our ability to meet all your expectations so that you know you are always our number one focus.
There are cases where apartment complexes allow you to choose from a color wheel of neutral hues before you move in. Some charge a fee for calling in a painter to do the walls, while others offer new paint as a benefit of moving in. If you're not a fan of neutral colors, consider looking for an apartment that allows you to paint the walls a more expressive tone. Otherwise you can invest in boldly colored furniture and posters.

Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport


Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks  when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
To deliver picture-perfect results, our house painters offer Memphis homeowners our 20-Step Process for house painting. This process includes a color, paint, and finish consultation to help you choose the perfect tone (or tones) for your project. This is followed by a skilled and systematic approach to house painting that delivers smooth surfaces, crisp lines, and a flawless finish.
The  continuous innovation on time saving ideology and the goal to create added value for our customers in order to keep them happy & satisfied always keeps us one step ahead of our competition. Through ongoing rigorous technical testing, KISEKI has developed and produced high-quality, innovative range of decorative paints that meet or exceed the market standards.We are committed to top quality workmanship, highest level of professionalism and best in class customer satisfaction standards with an aspiration to complete your interior home painting in a one-day time frame.
Painters often tint primer close to the color of the top coat, but Wallis thinks that's a recipe for "holidays," or missed spots. Instead, he tints his primer a contrasting color. "If I can see the color coming through, I know I need to apply more paint," he says. On the cottage shown in this story, he chose a gray-blue primer to go under a peach top coat.

It has the potential to be a good segment, but assuming all of the 'nightmares' might not be super obvious, I think instead of just laughing at pictures and making snarky comments, it would be helpful if they pointed out what exactly is wrong, why it's wrong, and what would be involved in remediating such a problem.With a home inspection as part of a real estate transactions, buyers are often faced with a decision of what to do with the information from the inspection- ex. do we walk away, asked for it to be fixed, just accept it, etc. So having the guys give that sort of context to the pictures would be helpful as well For example in the second photo with the little step, that might be really simple and cheap to fix, or maybe it requires a whole new porch be poured. Explaining that would make this so much better vs just snarking at the photo

Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.
We have been beautifying homes like yours for over 30 years. Let our team come to your home and vitalize your homes exterior and interior. We are offering the newest product called "Liquid Stucco Fogging" with prices starting at $799 for single family homes. We also do paint, natural stone, rock, cement driveways, drywall, stucco matching and patching and much more - put our 30 years experience to the test. We do the job right the First time out! No money down just good work at a fair price.Call today to schedule your appointment.
Lastly, chose a sheen to match the needs of the space. Flat finishes hide imperfections well and absorb light which can make the paint look darker. Eggshells and satins are tough enough to be used in family rooms, kids' rooms, and hallways but don’t hide surface imperfection well. Semi-Gloss and high-gloss finishes are primarily used for trim because they accentuate woodwork details and clean up easily.
How about considering older workers, those who retire early, have great work ethics, and could learn a new trade. After sitting at a deskfor thirty years, or more, but have 20 good years left to work, how about training to be a bricklayer, or operate a bobcat , etc. Lots of great folks out there, who could use the income to supplement Social Security.
First off all clients want a "deal" As a painting contractor for 38 years I can tell you that residential-commercial-industrial clients (and their needs are all diffrent. It seems this discussion mostly concerns residential repaints,so here goes--first off ALWAYS get a personal referance from a friend or co-worker. Always get an itemized contract that specifies the prep,color, number of coats, and specifics on payment. Remember you want to set up a relationship with the painting contractor of your choice. Bond, license and insurance are required to get a contractors license and are readily available online at your state Labor and Industries website. Second-- find someone you trust. He or his crew will probably be left alone in your home for most of the time. I always tell my clients that I wont bring someone to their home I wouldnt have in mine. Third--$$ Dont ever pay up front always insist on progress draws if the project is 2 or 3 phases remember If a contractor wants $3000 to do the job and you give him half up front he will be working for $1500. It WILL affect the quality of the product. In 38 years of business I have never taken a deposit and have never not been paid in full remember do what you said you would do for exactly what you said it would cost and there will be no problems with getting paid. one last reminder to clients you are also being evaluated when you interview a contractor. He is sizing you up as well. If he thinks you are a bit sketchy the the price will go up or he wont take the job at all. I have turned down some jobs that looked very profitable on the surface that turned out not to be so.(word gets around fast in the small painting community) Good Luck to clients and contractors
×