Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]

Buying a can of premium paint, then bait and switch over to low-line products? Again, complete nonsense. Think about it for a moment; the Painter needs 5 gallons of wall finish. So, he buys one can of premium and the rest 'cheap'? How is he going to hide the 4 other gallons? What's he going to hide it in??? He only has ONE gallon of premium. It's not as though he's going to keep older can labels, they would be covered in paint of a different colour.

Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!


Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks  when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
We have been beautifying homes like yours for over 30 years. Let our team come to your home and vitalize your homes exterior and interior. We are offering the newest product called "Liquid Stucco Fogging" with prices starting at $799 for single family homes. We also do paint, natural stone, rock, cement driveways, drywall, stucco matching and patching and much more - put our 30 years experience to the test. We do the job right the First time out! No money down just good work at a fair price.Call today to schedule your appointment. 

At Five Star Painting, we deliver five-star quality without the five-star price! Our teams are comprised of estimators, painters and production managers dedicated to completing each job within your budget and timeframe. Our company is locally owned and operated by members of your community. What’s more, we know paint and we know how to help you achieve the look you’re striving for.
Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.
I managed commercial construction projects for many years, have built and remodeled several properties, and never once have I encountered any of these scams. The tone of this article is deeply troubling. The author seems to be saying that ALL painting contractors are inherently dishonest, and that has not been my experience. The underlying advice here is sound: get it all in writing and cover as many contingencies as possible--so pointing out potential pitfalls like coat coverage is helpful. But do that in the spirit of clear communication of expectations, not with the expectation that the person you are hiring will try to cheat you at every turn. Not every contractor takes outrageous advantage of change orders; not every contractor will sneak past necessary preparation and/or repairs. Contractors of all sorts get a bad rap as it is; reinforcing a stereotype with articles written from this point of view just seems unproductive.
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.
Purchase a “Color to Go” paint sample or samples so you can see how the colors will really look in your home. You can also purchase a Small (12”x12”) Wall Sample Board to apply the paint to and move the painted board around the rooms to see how they look on your walls and in different lighting. Both can be purchased at your local Home Depot or Sherwin-Williams store and will eliminate putting a variety of colors on the walls of your home.

It is often necessary to have a rental property painted -- whether it's to make it your own before you move in or to clean it up for someone new when you move out. Some buildings and landlords have pre-selected painters, while others will contract companies to paint on an as-needed basis. If your landlord or building doesn't have a pre-selected painter, see if you may be allowed to paint the walls yourself. If you're moving in and selecting a non-neutral color, understand that your landlord may require you to repaint the walls the original color when you move out -- and ensure that you're ready to make that investment down the road.
Interior Painting and Restoration: Interior painting for antique buildings often means painting or papering over plaster, which cracks as the building settles and results in moisture stains. Arch Painting remedies these problems by filling and sanding cracks and applying bacteria-resistant primer over discolored areas. Need light carpentry renovations to provide a flawless foundation for your paint? We’re happy to accommodate.

A fresh coat of paint makes everything it touches seem brand new. But such new beginnings cost real money. Professional painters charge around $4,000 for labor and materials to paint the exterior of a 2,500-square-foot, two-story home and roughly $5,500 for the interior. Painters’ rates may range from $20 to $60 an hour, but around $40 is typical in urban areas.
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]

Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts.
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
In 1894, a national association formed, recreating itself in 1918 as the National Federation of Master Painters and Decorators of England and Wales, then changing its name once again to the British Decorators Association before merging, in 2002, with the Painting & Decorating Federation to form the Painting & Decorating Association. The Construction Industry Joint Council, a body formed of both unions and business organizations, today has responsibility for the setting of pay levels.[2]
More recently, professional painters are responsible for all preparation prior to painting. All scraping, sanding, wallpaper removal, caulking, drywall or wood repair, patching, stain removal, filling nail holes or any defects with plaster or putty, cleaning, taping, preparation and priming are considered to be done by the professional contracted painter.
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.

Get Best House Painter Contractor

×